show voip ip-group
This command displays the following QoS metrics per IP Group:
| ■ | QoE profile metrics per IP Group and its associated Media Realm on currently established calls such as MOS, jitter, packet loss, and delay. Metrics are displayed as average amounts. |
| ■ | Bandwidth Profile (BW) metrics for Tx and Rx traffic per IP Group and/or Media Realm. Metrics are displayed with a status color for each specific port. |
| ■ | QoE profile metrics for the remote (far-end) such as MOS, jitter, packet loss, and delay. Each metric is displayed with a specific color. |
| ■ | Group MSA metrics for the IP Group and the Media Realm. Metrics are displayed as an aggregated value. |
Syntax
show voip ip-group <IP Groups Table Index> media-statistics
Command Mode
Basic and Privileged User
Example
Displaying QoS metrics of IP Group configured in row index 0:
show voip ip-group 0 media-statistics IPGroup 0. BWProfile: -1, QoEProfile: -1 -------------------------------------- MSA: 0 Averages: MOS 0 Remote MOS 0 Delay 0 Remote Delay 0 Jitter 0 Remote Jitter 0 Fraction loss tx 0 Fraction loss rx 0 Packet sent 0 Packet received 0 Audio Tx BW 0, Audio Tx Status Green Audio Rx BW 0, Audio Rx Status Green Total Tx BW 0, Total Tx Status Green Total Rx BW 0, Total Rx Status Green Video Tx BW 0, Video Tx Status Green Video Rx BW 0, Video Rx Status Green MSA color Gray MSA remote color Gray MOS color Gray remote MOS color Gray Delay color Gray remote Delay color Gray PL color Gray remote PL color Gray Jitter color Gray remote Jitter color Gray color is not relevant Media Realm -1. BWProfile -1, QoEProfile: -1